Comprehensive Review of Crop Water Requirement Estimation Techniques: Approaches, Challenges, and Future Directions
Sakshi Dixit *
Department of Soil and Water Conservation Engineering, MCAET, ANDUAT, Kumarganj, Ayodhya, India.
Vikas K. Singh
Mahamaya College of Agricultural Engineering & Technology, ANDUAT, Kumarganj, Ayodhya, India.
Shivam
Mahamaya College of Agricultural Engineering & Technology, ANDUAT, Kumarganj, Ayodhya, India.
Ankit
Department of Soil and Water Conservation Engineering, MCAET, ANDUAT, Kumarganj, Ayodhya, India.
Vipin Kumar Roshan
Department of Soil and Water Conservation Engineering, MCAET, ANDUAT, Kumarganj, Ayodhya, India.
Sarvda Nand Tiwari
Department of Soil and Water Conservation Engineering, MCAET, ANDUAT, Kumarganj, Ayodhya, India.
Akanksha Mathur
Department of Soil and Water Conservation Engineering, MCAET, ANDUAT, Kumarganj, Ayodhya, India.
Mo Akram
Department of Soil and Water Conservation Engineering, MCAET, ANDUAT, Kumarganj, Ayodhya, India.
Khwahiz Ali
Department of Soil and Water Conservation Engineering, MCAET, ANDUAT, Kumarganj, Ayodhya, India.
*Author to whom correspondence should be addressed.
Abstract
In order to meet the growing demand for water, water scarcity is a significant issue that needs attention. Agriculture crops are not getting enough water because of this problem. Consequently, figuring out how much water a given crop needs requires using the right method. Accurate crop water requirements must be measured in order to schedule irrigation effectively, which in turn leads to efficient crop water management. To restore the lost moisture and promote the best possible growth for plants, irrigation is used. Water management and irrigation scheduling fundamentally depend on an accurate calculation of the crop's crop water requirements (ETc). Accurate evapotranspiration measurements are necessary for effective irrigation water management. Evapotranspiration (ET), a process that measures the amount of water lost from soil and crops through transpiration and evaporation processes, respectively, is dependent on a variety of meteorological factors. A significant factor in determining crop water requirements and irrigation schedules is reference evapotranspiration. There exist multiple theories and methodologies for estimating reference evapotranspiration, ranging from empirical to physical based. Reference Evapotranspiration is referred to the idea behind ET is to calculate ET based on a reference surface that is comparable to a deep surface of green grass that is consistently growing, completely covering the surface with enough water, and looking stable. The goal of irrigation futures is to choose a suitable model for estimating reference crop evapotranspiration. In order to calculate the amount of water needed for a crop, multiply ETo by the crop coefficient (Kc), which is dependent on the phases and length of a crop's growth. Regression, fuzzy logic, Penman-Monteith, Blaney-Criddle, Hargreaves, ANN and WNN, and other conventional and non-traditional methods are used to estimate ETo.
Keywords: Crop water requirements, evapotranspiration, reference evapotranspiration, crop coefficient